There are currently no products in your basket.

Croysleeve

HIGH TEMP GLASS FIBRE SLEEVE

Product Code: 230

Length: 10 Metre Pack

Price dependent on the following options:

Price From: £1.70 (price excluding VAT)

About this product

Impregnated with silicone varnish, this sleeving is ideal for thermal and electrical insulation applications where high operating temperatures exist. It’s a highly flexible braided glass sleeve that is ideal for use where low fire hazard properties are required, particularly in mass transit and underground applications.

  • Highly flexible – will bend without flattening around a diameter less than ten times its bore
  • Excellent temperature resistance
  • Highly resilient
  • LSZH
  • Self-extinguishing
  • Oxygen index 64.5%
  • Good fray resistance
  • Compatible with most impregnating varnish systems
  • Excellent resistance to solvents
  • Harnessing
  • Mass transit cable protection  
  • Electrical insulation

Product Code

230

Material

Silicone Impregnated Fibreglass

 Standard Colour

Natural

Operating Temperature – °C

-40  –  +300 (Peaks at 450 °C)

Dielectric Strength – kV

1

Relevant Specifications

IEC 60684, UL  1441, LUL Approved

PRODUCT

TEST

RESULT

THERMAL OVERCHARGE AND AGEING RESISTANCE

Simulation of real operating

conditions

10 days at 350°C

 

HEAT RESISTANCE

Bending after heating IEC 60684

Part 2 Clause 13, 48 hours at

400°C

No cracking.

Silicone varnish will burn off

CHAMICAL RESISTANCE

Simulation of real operating

conditions

Excellent resistance to solvents.

Compatible with most insulating varnishes

FLAMMABILITIY

Flame propagation:

IEC 60684 Part 2 Clause 26

Method B vertical with wire.

 

Flame test: UL 1441 VW-1 vertical with wire

Will not ignite

 

 

 

 

Will not ignite

ABRASION RESISTANCE

SAE ARP 1536A

Minimum 4,000 cycles

COLD RESISTANCE

Bending at low temperature IEC

60684 – Part 2 Clause 14

No cracking after bending at

-40°C

OXYGEN INDEX (I.O.)

UNE EN ISO 4589

10 = 64.5%

TOXICITY

NF X 70-100

ITC = 4.08

SMOKE DENSITY

NF X 10-702

(Test conducted in flame mode)

 

V0F4 = 3.2

Dmax = 3

 

SMOKE INDEX

NF F 16-101

IF = 2.2

Pricing Matrix Expand

Customer Experiences (0) Expand

Write Your Own Review